![usb 3 card hackintosh usb 3 card hackintosh](https://images-na.ssl-images-amazon.com/images/I/61W8eiUlR%2BL._AC_SX425_.jpg)
So, manually modify ist to add the boot option ( NVRAM->Add->.long string of chars->boot-args). In OpenCore 0.5.9, this step did not work for me. This appends the boot option -uia_exclude_ss to NVRAM which will persist across reboots. Disable all ports named “ SS* ” - using USBMap script, select “ S.aml files:Ĭopy those to your EFI/OC/ACPI folder, edit your ist to add them to the ACPI section, and reboot. Build SSDT-UIAC”, which will generate two. That leaves me with 12 HS ports, and 2 USR ports, bringing me up to 14 ports.ĭebug=0x100 keepsyms=1 alcid=1 agdpmod=pikera -uia_exclude_ss -uia_exclude_hs uia_include=HS03,HS04,HS05,HS06,HS07,HS08,HS09,HS10,HS11,HS12,HS13,HS14,USR1,USR2īack at the main menu of USBMap, pick “S. There was no USR1, either, but the USBMap documentation does not say anything about enabling or disabling USR* ports, so leave that enabled. There is no HS02 shown in either diagram, and none of the ports I could test were HS02: so, disable that.
#Usb 3 card hackintosh Bluetooth
I will leave the internal Bluetooth ( HS14) enabled. I do not currently have any USB 3.1 Gen 2 Type C devices, but I am planning to get at least one: I will enable both HS08 and HS13. The case I am using has no front-panel USB Type-C ports, so I can leave HS01 disabled. I have no USB Type-C devices, so I cannot check the two USB Type-C ports on the rear panel. I have verified this is correct, for the ports that I can use. From this post at tonymacx86, someone has listed the USB ports for this motherboard: back panel, and internal headers. Then, manually enable a specific set of HSxx ports. The script allows you to disable all SSxx ports and all HSxx ports. (This is the same as the list that corpnewt has on their system.) Using the USBMap script, can see that there are 26 ports listed: HS01 - HS14, USR1 - USR2, SS01 - SS10. (Additional USB hubs get their own 15-port limit.) Suspicion: the breakage is due to the macOS 15 USB port limit. So, this may be of some use as a summary of USB port mapping in OpenCore, but of no use at all for fixing Bluetooth issues.īluetooth stopped working for unknown reasons. Discovered that Bluetooth is actually an internal USB device. I had also cleared the CMOS and re-set all the BIOS settings before I went through all of this. Tl dr This did NOT fix my Bluetooth issue. Quick way to see that Bluetooth is OK is that System Information on the Bluetooth device should show a non-trivial address.
#Usb 3 card hackintosh windows
What I did: booted into Windows (installed on a separate SSD), used Windows to connect to the speaker, quit Windows to boot into Hackintosh, and Bluetooth works again. No idea why: everything about OpenCore is still kind of a mystery to me. Everything works OK, including Bluetooth. Undoing all the USB mapping stuff fixed my non-functioning USB ports. I did set them to “Type 3” which is “USB 3 Standard-A connector”.
#Usb 3 card hackintosh update
UPDATE 2: My attempts at “fixing” USB mapping broke all the USB 3.x ports.